RPM OUTLET - WE TAKE THE GUESSWORK OUT OF PERFORMANCE PARTS! ®
Simply mouseover and click on vehicle application or specific power option link for your vehicle.

DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 2005-10 MUSTANG GT/BULLETT
STRATEGY

In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 2005-10 Mustang GT 3 Valve Motor.

We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.

The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower.
(click-in flash for details)
746 RWHP (823 crankshaft HP) 2005 3V Mustang GT
Stock Motor, DiabloSport Tuned F-1A ProCharger Kit!

746 HP (823 crankshaft HP) 2005 3V 5seed Mustang GT with Stock Motor, DiabloSport Custom Tune and F-1A ProCharger Kit custom tuned by RPM Outlet.com

Click Here for our SHOP BY PACKAGE Dyno Tuned Options page.


Electric Water Pump Kit, with Idler
Increase your horsepower up to 12 RWHP, and increase mileage by 1 to 2 MPG

Satin Anodized System Shown In This ImageRPM Outlet is proud to announce the introduction of an exciting new product, the Meziere extreme duty electric water pump! Yes, we said an electric water pump. This design has been in use since 1996, and has proven to be as reliable as the OEM water pump.

The Meziere extreme duty electric water pump replaces the factory high drag, horsepower robbing, factory water pump. The Meziere extreme duty electric water pump increases your horsepower up to 15 RWHP, and increase mileage by 1 to 2 MPG! This pump was designed with the daily street driven vehicle in mind, and it can also be used on fully equipped racecar. Installation of this pump is identical to the factory pump installation, and can be easily completed in less than 1 hour.

This is a direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt. It also provides an unbelievably constant water temperature under any condition.

adds up to 11.2 RWHP hp Chrome Plated System Shown In This Image
  • Direct Replacment *
  • Solid 12 Rear Wheel HP
  • Flows 55 Gallons per Minute
  • Designed for Daily Street Use
  • Free-Wheeling Billet Idler
  • Retention of the stock belt
  • Stock Belt Routing
  • Easy 1 Hour Installation
  • Detailed Instructions Included
All

4.6L
5.4L
6.8L
    Meziere High Flow Electric Street Water Pump (satin finish)

  • CNC-machined from 6061-T6 billet aluminum.
  • Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP.


  • Meziere High Flow Electric Street Water Pump is direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt.

$ 329.00

All

4.6L
5.4L
6.8L
    Meziere High Flow Electric Street Water Pump (chrome finish)

  • CNC-machined from 6061-T6 billet aluminum.
  • Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP.


  • Meziere High Flow Electric Street Water Pump is direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt.

$ 416.00

Electric Street Water Pump
Relay Kit


$ 38.00

Zex Covered
Toggle Switch


$ 22.00

Royal Purple Ice
Super Coolant Additive


$ 12.00






160° / 180° Low-Temperature Thermostat

A Hypertech PowerStat low-temp thermostat improves performance in two ways: first by increasing the mass flow rate of intake air, and second by reducing the engine's tendency to detonate.

From the laws of physics, cooler air is denser than warmer air. Since horsepower increases as the amount of air and fuel burned increases, cooler air (with more air molecules per cubic inch) makes more power. The PowerStat allows the engine to cool down to a lower temperature than the factory thermostat to make more power. At the drag races, water can be sprayed on the radiator between races to drop the temperature and improve performance. The PowerStat ensures that you leave the line at the same temperature on each run to give consistent maximum performance for bracket racing.

A lower temp T-stat reduces the temperature of both the incoming air/fuel mixture and the surfaces of the combustion chamber, greatly reducing the tendency to detonate. Detonation is an audible pinging / knocking sounds, refers to the spontaneous explosion of the unburned air/fuel mixture in the combustion chamber. Detonation reduces power, and can severely damage an engine. A lower temp T-stat allows the engine to safely develop more horsepower.


  • Increases Mass Flow Rate of Intake Air
  • Allows Engine to Cool Down to Lower Temperature than Factory Thermostats
  • Reduces Engine's Tendency to Detonate
  • Reduces Temperature of Both the Incoming Air/Fuel Mixture and Combustion Chamber Surface
Ford 160° PowerStats

P/N HYP1011
1996-09, 4.6L/5.4L
All Car - Truck
$ 14.00

Ford 180° PowerStats

P/N HYP1025
1996-09, 4.6L/5.4L
All Car - Truck
$ 14.00





Purple Ice®


Purple Ice® is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines. It is formulated to reduce the surface tension of the coolant, which improves heat transfer through the cooling system while providing additional protection against rust, corrosion and erosion.

Purple Ice® prevents the formation of scale deposits in the radiator for optimum coolant flow and lubricates the seals of the water pump. It is ideal for use in straight water racing applications or in antifreeze / water mixtures.

Purple Ice® is compatible with traditional ethylene glycol antifreeze (green) and GM Dex-Cool® antifreeze coolants. Purple Ice should not be used in new radiators until anti-freeze has been cycled through the

    Purple Ice® Performance Advantages:

  • Reduces Coolant Tension
  • Reduces Coolant Temperatures
  • Protects Aluminum Cooling Systems
  • Lubricates Water Pump Seals
  • Provides Corrosion Resistance
  • Passes ASTM Corrosion Tests
  • Works in both Gasoline and Diesel Engines
Item #: ROY-01600

$ 11.75





Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
Click Here To enter this web page
RPM OUTLET™ - MOTOBLUE™ Copyright © 2002-2009 RPM Outlet Inc. All rights reserved. Any unauthorized duplication of any portion of this site strictly prohibited