Fords Racing answer to a throttle body upgrade that actually works and will not trip the check engine light!

Ford Racing's twin 62mm billet throttle body is a direct bolt on in the factory location. Now you can bolt on over 12 horsepower and 18 ft. lbs. of torque to the rear wheels of your Mustang GT just by installing this Ford Racing's twin 62mm billet throttle body.

By replacing the factory 4.6 3V twin 55mm throttle body with Ford Racing's twin 62mm billet you will allow your car to breathe over 250 cfm more throughout the entire RPM range.

Ford Racing's twin 62mm billet Features:


• Fully assembled complete with throttle position sensor and actuator motor, ready to bolt on!
• Uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies.
• Similar throttle body on the 2008 Mustang FR500CJ race car.
• Fits factory location on 2005-10 Mustang GT.
• Twin 62mm bore, stock Mustang GT is twin 55mm.
• Precision machined from billet aluminum to ensure consistency.
• Polished finish with machined Ford Racing logo.
• Tested to Ford original equipment specifications for cold and hot weather.

Installation is simple. Bolts on in about an ½ hour with only an 8mm wrench, 10mm wrench and flat head screwdriver.

Ford Racing Billet Twin 62mm Billet Throttle Body Kit Billet aluminum twin 62mm throttle body Direct Bolt-on Replacement, Requires No Other Modifications	$ 529.50
Ford Racing Cobra Jet Billet Twin 63.5mm Billet Throttle Body Upgrade Kit* Billet aluminum twin 63.5mm Throttle Body and Adaptor Direct-Replacement, Requires No Other Modifications	$ 629.50

*Will not work with factory rubber inlet tube

The MOTOBLUE GEN X Throttle Body Spacer is designed with performance as well as ease of installation in mind. The engineers at Motoblue have developed a new generation throttle body spacers design that provides improved performance and economy! Utilizing multiple aerodynamic principles, the The GEN X Throttle Body Spacer promotes air breakup and turbulence that yields greater fuel burn efficiency, which translates into the best performing and efficient product of its type in the market today!

FYI A throttle body spacer is designed to increase speed and volume to the incoming intake air, and atomize the fuel more efficiently increasing HP, and MPG. A throttle body spacer is a fairly simple modification to add to your vehicle, installation time is less than 30 minutes with very basic hand tools.

Features:


• Up to 9+ hp gains*.



• Up to 25 ft lb gain in Torque*.



• UP to 2+ miles per gallon increase in fuel mileage*.



• Quality Features:
  1. Billet aluminum spacer w/superior design
  2. All factory emissions
  3. CNC machined for leak proof fitment
• Sound of power operation.



• Performance benefits across entire power band*.



• Increased airflow, Quicker acceleration.



• Will not affect emissions (C.A.R.B. certified).



• Complete with all gaskets and hardware, easy installation.

We are proud to announce the return of a product brought back by popular demand. The S&B Valve cover breathers. The S&B Valve cover breathers were designed to relieve crankcase pressure, on all mod motor applications and also minimizes oil build up behind throttle body and intercoolers.

Designed to work with the following vehicles; 03-04 Ford Cobra, 86-08 Mustang, 99-04 Lightning, Harley Trucks, and any Ford Product that utilizes the standard black screw on oil filler valve cover cap. Installs in seconds, simply remove oil cap from valve cover and replace with S&B breather of your choice.

Features:


• Provides maximum protection without restricting air flow
  
  
• Completely exposed filter element and chrome plated top
  
  
• All styles come in two types; Twist on / Clamp-On
  
  
• Cleanable and re-usable; oil before use