DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR YOUR 05-09 MUSTANG GT

	STRATEGY In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 05-08 Mustang GT 3 Valve Motor. We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible. The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower. (shown on right) 746 RWHP (823 crankshaft HP) 2005 3V Mustang GT Stock Motor, DiabloSport Tuned F-1A ProCharger Kit!

Are you looking to replace your Flywheel?
What the best choice for you, Steel or Aluminum Flywheel?

The flywheel is the foundation of the clutch system; it stores the energy that determines the amount of power available when you launch your car.

SFI Approved Billet Steel Flywheel : The steel flywheel stores more energy as it spins than an aluminum flywheel. If your engine and gearing combination requires more power or inertia to make the car launch without bogging the motor (4.10 or 430 gear ratio), you will want the steel flywheel.

SFI Approved Billet Aluminum Flywheel :
The billet aluminum flywheel creates less inertia at launch and will require a higher RPM but will accelerate quicker through the gears.

Keep in mind though, the heavier flywheel will be slower in acceleration through the gears. A lighter flywheel creates less inertia at launch will accelerate quicker through the gears.

All billet flywheels are CNC machined from certified material and exceed all SFI specifications.

RAM Clutch Roller Pilot Bearing	2005-09 Mustang (4.6L) GT Steel Flywheel	2005-09 Mustang (4.6L) GT Aluminum Flywheel
Pilot Bearing Pilot Bearing Roller-Type $ 15.00	SFI Aproved Flywheel More Info Click-Here GT, 10.5/11-in. $ 275.00	SFI Aproved Flywheel More Info Click-Here GT , 10.5/11-in. $ 550.00

NOTE: We strongly recommend you upgrade your pilot bearing during clutch replacement.

RAM EXTREME DUTY Hydraulic Release Bearing (Hydraulic Throwout Bearing) The RAM EXTREME DUTY Hydraulic Release Bearing for the Ford Mustang 2005-09 GT / Shelby GT500 is designed by RAM as a direct replacement for the weak performing factory release bearing. The bearing is a floating design and installation is quick, simple and require no special tools. A remote bleeder kit is also available from RAMto make bleeding simple from outside the bellhousing. All parts necessary for rebuild are available from RAM.   RAM EXTREME DUTY Hydraulic Release Bearing(Hydraulic Throwout Bearing) Ford Mustang 2005-09 GT / Shelby GT500 $ 350.00