|
|
 DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 2009-10 SHELBY GT500 |
|
|
 STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the Ford Shelby GT500.
We have invested many hours evaluating and refining each of the Shelby GT500 products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
FORD RACING COBRA JET BILLET ALUMINUM THROTTLE BODY
(1300cfm) Twin 63.5mm billet Throttle Body Kit
|
Ford Racing has stepped up with their on version of a throttle body upgrade that is a direct bolt-on for your Shelby.
Lets talk Ford RACING throttle body! This throttle body is the Service replacement for the 2008 Mustang FR500CJ race car, and was designed to fit in factory location on 2007-09 SVT Mustang.
Ford racing has tested this throttle body to produce over 800 hp in the 2007-09 SVT Mustang applications. Made from precision machined billet aluminum to ensure consistency, uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies
, and featurs a polished finish with machined Ford Racing logo. Rest assured this throttle body has been tested to Ford original equipment specifications for cold and hot weather.
FYI Comes fully assembled, complete with throttle position sensor and actuator motor. Installation time is less than a 1/2 hour
Includes all hardware detailed instructions, Bolts on in about an ½ hour with only an 8mm wrench, 10mm wrench and flat head screwdriver.
|
|
Ford Racing Cobra Jet Throttle Body
- Service replacement for the 2008 Mustang FR500CJ race car.
-
Fits in factory location on your Shelby GT500.
-
Tested to over 800 hp in Shelby GT500.
-
Precision machined from billet aluminum to ensure consistency.
-
Polished finish with machined Ford Racing logo.
-
Tested to Ford original equipment specifications for cold and hot weather.
-
Fully assembled, complete with throttle position sensor and actuator motor, ready to bolt on.
-
Uses OE gears to prevent gear bind and wear common with other aftermarket throttle bodies.
|
Ford Racing 2007-09 Shelby GT500 Throttle Body
- Precision machined from billet aluminum to ensure consistency.
- Direct trouble free replacement for the 2007-09 Shelby GT500
- This Kit will add up to an additional 22+ HP @ 5900 RPM.
|
$ 599.50
|
BBK HIGH-PERFORMANCE TWIN 65mm THROTTLE BODY ASSEMBLIE
5.4L 2007-09 Shelby GT500
|
Your 2007-09 Shelby GT500 develop amazing HP gains from just about any modification done to their intake system coupled with their supercharger,
and this throttle body is sure not to disappoint. Adding up to 16 HP by just unbolting the old and bolting in the new, this throttle body is
designed to help you push your Cobra to the limit, increasing airflow by up to 45%!
Like its other BBK Throttle Body bretheren, this throttle body is cast from high-quality 356 aluminum alloy and CNC machined. BBK even goes to far as to include includes double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages.
FYI Installation time is less than a 1/2 hour
Includes all hardware detailed instructions, Bolts on in about an ½ hour with only an 8mm wrench, 10mm wrench and flat head screwdriver.
BBK BBK TWIN 65mm, Throttle Body Feature:
- Bolt-On up 16 horsepower in just minutes
- Cast from the highest quality aluminum
- State-of-the-art CNC machining
- Improved throttle response
- C.A.R.B. Exempt
- Direct-replacement and require no other modifications
|
 |
BBK 2007-09 Shelby GT500 Throttle Body Kit
This Kit will add up to an additional 16+ HP @ 5800 RPM.
Click-on Tech Button for "How-To" Instructions  
|
$ 299.50
|
S&B FILTERED VALVE COVER BREATHER KITS
|
We are proud to announce the return of a product brought back by popular demand. The S&B Valve cover breathers. The S&B Valve cover breathers
were designed to relieve crankcase pressure, on all mod motor applications and also minimizes oil build up behind throttle body and intercoolers.
|
|
Designed to work with the following vehicles; 03-04 Ford Cobra, 86-08 Mustang, 99-04 Lightning, Harley Trucks, and any Ford Product that utilizes the
standard black screw on oil filler valve cover cap.
Installs in seconds, simply remove oil cap from valve cover and replace with S&B breather of your choice.
Features:
- Provides maximum protection without restricting air flow
- Completely exposed filter element and chrome plated top
- All styles come in two types; Twist on / Clamp-On
- Cleanable and re-usable; oil before use
| 
|
|
|
Simply mouseover and click on vehicle application or specific power option link for your vehicle.
2005-2010 MUSTANGS
Cold-Air Kit
GEN II FIPK® Cold-Air
Valve Cover Breather Kits
Twin 65mm Throttle Body 
Billet Throttle Body 
Line-Loc (brake-control)
Heat Exchanger
Heat Exc. RACE TANK
160º/180º T-Stats
Methanol Injection
Motor Oil / Gear Fluids
Lower Pulley Kit
TRINITY T-1000
LIVEWIRE
3.73/4.10 Gears
High Flow Cat.Converters
Ceramic LongTubes
Series X-Pipes
X-Pipe
Axle-Back™ Kits
Axle-Back™ Kits
LOUD MOUTH™ Kits
Braided Hose and Fittings 
Wideband air/fuel meter
Wideband air/fuel meter
GaugeWorks Pods
2 1/16' Gauges
Coil-on-plugs
Coil-near-Plugs
Copper/Iridium Plugs 
Performance Spark Plugs
Adj. Rear Upper Control Arm
Drag Radials / Slicks
Caster-Camber Kits
CNC BILLET Shifter
HURST Handles/Balls/Knobs
Dual-Friction Kit
TWIN Disc Clutch System
