|
|
 DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 2009-10 SHELBY GT500 |
|
|
 STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the Ford Shelby GT500.
We have invested many hours evaluating and refining each of the Shelby GT500 products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
PYPES Stainless Steel Violator Cat-Back Kits
2005-09 Mustang GT/Shelby GT500
Features:
- Stainless mandrel-bent over axle pipe
- 4" polished stainless steel tips
- Pypes Street-PRO/Violator mufflers
- Clamps, hangers and hardware
- Slip-fit for ease of installation
- 50 state smog legal
- Everything needed to do the job!
|
|
Pypes Stainless Violator Cat-Back System- Stainless Steel
Violator series mufflers (agressive tone)- Mandrel-bent over-axle pipes
- 4" polished stainless steel tips, clamps, hangers and hardware
|
$ 339.00
|
| FYI : Are you buying a cat-back or axle-back exhaust for your 2005-10 Mustang V8 or V6 ?You'll need to select the "Pypes 2005+ Mustang 304 Stainless Steel Exhaust Hanger Kit"
Please view the bottom of this page for more information.
|
PYPES Stainless Steel Violator Axle-Back Kits
2005-09 Mustang GT/Shelby GT500
The Violator Axle-Back Exhaust from Pypes is the last exhaust system your 05+ Mustang will ever need!
Violator Axle-Back systems are constructed from high quality polished 304 or satin 409 Stainless Steel (selection dependent) for a long lasting finish. Both feature two Violator
"Rude Sound" mufflers for Pypes ultimate in flow with an ultra aggressive sound!
Your choice of 304 polished stainless or 409 Stainless, featuring 2.5" tubing with 4" polished 304 Stainless tips. Bolting eirther up to a stock 05+ GT you can see as much as a5-10 horsepower gain!
|
NOTE: This system is fully 409 Stainless Steel, only the tips are 304 Polished Stainless Steel!
 |
Pypes 409 Stainless Violator Axle-Back (satin finish) - T-409 Stainless Satin Finish
- 2-1/2 Inlet and Outlet
- Mandrel-bent over-axle pipes
- 4" polished stainless steel tips, clamps, hangers and hardware
Pypes 304 Stainless Violator Axle-Back (polished finish) - T-304 Stainless Polished Finish
- 2-1/2 Inlet and Outlet
- 4" polished stainless steel tips, clamps, hangers and hardware
|
$ 230.00
$ 300.00
|
| FYI : Are you buying a cat-back or axle-back exhaust for your 2005-10 Mustang V8 or V6 ?You'll need to select the "Pypes 2005+ Mustang 304 Stainless Steel Exhaust Hanger Kit"
Please view the bottom of this page for more information.
|
PYPES EXHAUST "66" series Stainless Steel MID-MUFFLER Cat-Back
100% T-304 Stainless Steel Cat-Back Exhaust System
Pypes Mid-Muffler Cat Back System for the 05+ Mustang GT eliminates the factory muffler location's "import muffler effect" and delivers
"That Sound" that seems to be missing from a rear mufflered car.
|
Pypes All Stainless mandrel bent MID-MUFFLER Cat-back exhaust system offers all of the great features
of their axle-back products but with the added advantage, it features two M-80 Bullet Style mufflers for ultra high flow and an ultra aggressive sound!
Pypes NEW Stainless mandrel bent MID-MUFFLER Cat-back designed with 2.5” Stainless mandrel bent piping. Each system includes Polished T-304
stainless Pypes mufflers (M-80 Bullet), T-409 Stainless tailpipes, stainless band-clamps and 4.0" T-304 Stainless Tips.
Installation of this kit is quite simple and includes all of the special parts, band-clamps, new brackets, detailed installation instructions for a trouble free
installation, Home installation should take no more than 2 hours to complete.
|  |
T-309 Polished Stainless Steel MID-MUFFLER Stainless Cat-Pipe Back
- Polished T-304 Stainless M-80 Mufflers, Mandrel Bent Piping
- Polished 4-inch Stainless Steel Tips, Tail Pipes
- Simple Bolt on (no welding/no cutting)
$ 369.00
|
|
| FYI : Are you buying a cat-back or axle-back exhaust for your 2005-10 Mustang V8 or V6 ?You'll need to select the "Pypes 2005+ Mustang 304 Stainless Steel Exhaust Hanger Kit"
Please view the bottom of this page for more information.
|
Stainless Exhaust Hangers
Now you can swap out your Mustang's exhaust hanger hardware for pure 304 Stainless Steel! These hangers feature OEM style construction but ditch the rust prone factory steel for 304 Stainless!
They work with any aftermarket or stock cat-back exhaust system and will be the last hangers your Mustang will ever need! This kit fits all 2005-2007 Mustang V8 and V6 and is also the required hardware for installing a True Dual GT Cat-Back on V6 Mustangs!
|
 |
Applications:
- 2005-10 Mustangs All V8 & V6
- Required for 2005-10 V6 with True Dual GT Cat Back Conversion
- Required for mid-2007+ Axle-Back & Cat-Back Installation*
|
Pypes Stainless Exhaust Hanger Hardware Kit
Ford 2005-10 Mustangs All V8 & V6
- T-304 Stainless Steel Muffler Hanger.
- Sold as each, 2 required on duel exhaust kits
|
$ 22.50
|
| FYI: *Sometime during the mid-production run on 2007 Mustangs, Ford realized that they were loosing money on the intricate metal/rubber exhaust hanger they designed for the 2005+ Mustangs. Thus they switched over to a cheaper rubber only hanger system to attach the factory exhaust. Unfortunately, this system will ONLY work with factory exhaust and will not allow for installation of aftermarket exhaust. Switching to the 2005 to mid-2007 style hangers solves this problem and will allow for installation of any 2005+ Exhaust System on late production 2007+.
|
|
|
Simply mouseover and click on vehicle application or specific power option link for your vehicle.
2005-2010 MUSTANGS
Cold-Air Kit
GEN II FIPK® Cold-Air
Valve Cover Breather Kits
Twin 65mm Throttle Body 
Billet Throttle Body 
Line-Loc (brake-control)
Heat Exchanger
Heat Exc. RACE TANK
160º/180º T-Stats
Methanol Injection
Motor Oil / Gear Fluids
Lower Pulley Kit
TRINITY T-1000
LIVEWIRE
3.73/4.10 Gears
High Flow Cat.Converters
Ceramic LongTubes
Series X-Pipes
X-Pipe
Axle-Back™ Kits
Axle-Back™ Kits
LOUD MOUTH™ Kits
Braided Hose and Fittings 
Wideband air/fuel meter
Wideband air/fuel meter
GaugeWorks Pods
2 1/16' Gauges
Coil-on-plugs
Coil-near-Plugs
Copper/Iridium Plugs 
Performance Spark Plugs
Adj. Rear Upper Control Arm
Drag Radials / Slicks
Caster-Camber Kits
CNC BILLET Shifter
HURST Handles/Balls/Knobs
Dual-Friction Kit
TWIN Disc Clutch System
