DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 2009-10 SHELBY GT500

	STRATEGY In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the Ford Shelby GT500. We have invested many hours evaluating and refining each of the Shelby GT500 products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible. End result is our now available "Dyno Tuned Options". Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.

FORD RACING HIGH-LIFT CAMSHAFT KIT
for the 5.4L DOHC 4V MUSTANG Shelby GT500

In order to maximize the performance potential of your Shelby Gt500, Ford Racing recommends their higher lift camshafts from the Ford GT supercar. Contained in the kit are a set of direct retrofit camshafts. These camshafts provide excellent power right to the fuel cutoff at 7000 RPM, and actually bolster low-end torque as well. Drivability on the street is superior to production cams. Compatible with production springs, followers and lash adjusters.

Contained in this kit : Original equipment camshafts for the Ford GT supercar Direct retrofit to the 2007 Mustang GT500 Increases lift from the stock 10mm to 11.8mm on both intake and exhaust Compatible with production springs, followers and lash adjusters May require calibration to achieve optimized performance

FMS-M-6550-GT

FORD RACING HIGH-LIFT CAMSHAFT KIT Fits 5.4L DOHC 4V Mustang Cobra Compatible with production springs, followers and lash adjusters

$ 598.50

Ford 07-08 Mustang GT500
5.4L DOHC CAM COVERS

Liven up your Cobras engine compartment with a set of these Ford Racing Chrome valve covers. Fits all Ford 07-08 Mustang GT500 5.4L engines with coil on plug . Note : Shown with coil cover M-6067-A (sold separately) Ford Racing Valve Covers Feature : Original equipment valve cover powder coated for chrome appearance Contains new gaskets and grommets for easy installation Can be used with factory coil pack covers or M-6067-A - Chrome Coil Pack Covers Come with a set of two Installation of this kit is quite simple includes all of the special parts needed and should take no more than 2 hours to complete. Note : Shown with coil cover M-6067-A (sold separately)

FMS-M-6582-CC

Ford Mustang GT500 5.4L CAM COVERS Powdercoated for Chrome Appearance

$ 549.50

Ford GT and 2007 Mustang GT500
Chrome Coil Pack Covers

Liven up your GT500 engine compartment with a set of these Ford Racing Chrome Coil Pack Covers. Fits all Ford GT and 2007 Mustang GT500 5.4L engines with coil on plug (Chrome). Shelby GT500 Chrome Valve Covers Feature : Fits 4.6/54L DOHC engines with coil on plug ignition Micro polished billet aluminum Features two-color Ford Racing ball milled logo

FMS-M-6067-A

Ford GT and Mustang GT500 5.4L CAM COVERS Powdercoated for chrome appearance

$ 280.50