Looking for a product that will make your Trucks converter to improve fuel mileage, performance and durability? TCI® Automotive has the solution to this question!

Ford’s venerable Power Stroke® diesel is a favorite of truck owners looking for a hot performing tow vehicle. Owners looking for the ultimate transmission package (and those with power added aftermarket enhancements) will certainly want to install the new TCI® TruckMaster™ Torque Converter, which is available in three configurations (forged steel four-lug front cover for early model applications; aftermarket six-lug front cover and heavy duty clutch; and billet steel six-lug front cover, three heavy duty clutches and hand-built steel stator). Regardless of the application, there’s a TCI® TruckMaster™ Torque Converter to meet everyone’s needs.

The secret behind TCI® TruckMaster™ for Ford Power Stroke® E4OD/4R100 is the one-of-akind, hand-built, steel stator that reduces the stall speed and increases the torque converter efficiency to a new class and standard. The lower-than-stock stall speed converter reduces overall transmission temperature, increasing reliability, especially when towing large loads. The heavy-duty steel torque converter cover reduces converter flex, increasing clutch life. The furnace-brazed impeller blades increase reliability and efficiency, making it the best diesel truck converter on the market.

• Lower than stock stall speed converter makes for more efficient transmission operation
  
  
• The furnace-brazed impeller blades increase reliability and overall converter efficiency
  
  
• One-of-a-kind hand-built steel stator that reduces the stall speed – the right modification for diesel applications
  
  
• Three applications –
  1. Forged steel 4-lug front cover for early model applications,
  2. Aftermarket steel 6 lug front cover, heavy duty clutch
  3. Billet steel six-lug front cover, three heavy duty clutches and hand-built steel stator
  
  
  

TCI® TruckMaster™ Maximizer Torque Converter
• Forged steel 4 lug front cover

TCI® TruckMaster™ High Torque Towing Torque Converter
• 6 lug front cover, heavy duty clutch

TCI® TruckMaster™ High Torque Towing Torque Converter
• Billet steel 6 lug front cover, 3 heavy duty clutches

It’s a deep subject, but one which every owner of a diesel truck should be thinking about; keeping things cool. TCI®’s new line of high quality, diesel fluid pans do just that by increasing the fluid capacity of the transmission pan. The larger fluid supply and black powder-coated finish increase the heat dissipation, therefore dropping internal transmission temperature 20 to 30 degrees and increasing transmission life. Additionally, this “trick” looking pans are built from aircraft-quality aluminum and feature added cooling fins to further improve cooling.

Every TCI® diesel transmission fluid pan comes ready to install with everything you need to install it yourself. The included magnetic drain plug helps keep loose metal from being circulated through the transmission and the oringed (where applicable) sealing surface ensures against leaks. Pans are available for most common diesel engine applications.

• Increased fluid capacity for maximum cooling
• Magnetic drain plug
• Stainless steel installation hardware
• 1/8” NPT temperature sender port
• Finned aircraft aluminum construction
• Allen wrenches included for installation & service
• O-rings require no gaskets or sealants
• Every pan comes fully assembled with everything needed for installation
  
  

TCI® E4OD/4R100 Series Power Stroke Diesel
• Transmission fluid pan holds 7.5 extra quarts

TCI® 5R110 Series Power Stroke Diesel
• Transmission fluid pan holds 7.5 extra quarts

Innovative plate and fin design generates internal turbulence for exceptional heat transfer; Heat has always been the #1 cause of premature automatic transmission failure. The TCI® Max-Cool™ Transmission Cooler is the most effective way to keep your transmission cool and extend its durability and performance. The TCI® Max-Cool™ Transmission Coolers utilize a special “plate and fin” design, which reduces transmission temperatures by 33% over tube-style transmission coolers.

The TCI® Max-Cool™ Transmission Coolers feature pre-drilled mounting plates and 3/8'' push-on fittings to make installation easy and greatly improve durability. Available in sizes from 4'' x 11'' x 3/4'' through 9-7/8'' x 11'' x 3/4'', TCI Max-Cool Transmission Coolers are the most compact, space efficient coolers you can buy today.

• Features highly efficient and innovative “plate and fin” design
  
  
• Reduces transmission temperature by up to 33 percent for added durability
  
  
• Four different compact, space efficient coolers for all popular applications
  
  
• All coolers are 3/4-inch thick
  
  
• Pre-drilled mounting plates and fittings for easy installation
  
  

TCI® Max-Cool™ Transmission Cooler
• 4-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 6-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 7-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 9 7/8-inch long x 11-inch high x 1-inch thick