N.O.S. Nitrous Systems The easiest way to add 35 to 125 horsepower in less than 3 hours. Click here for more information on nitrous oxide and its powerful applications.

N.O.S. Systems and Accesories The Most Powerful Nitrous Systems On The Planet!

NOS PowerFogger^™ 4-, 6-, and 8-Cylinder E.F.I. Nitrous Kits 35-125 HP (adjustable)

RPM Outlet is proud to announce The Best Single fogger wet system available today. N.O.S. Brand Nitrous The Ultimate Single Fogger Wet System! The NOS™ PowerFogger™ E.F.I. Nitrous wet kits. The latest in NOS's cutting-edge nitrous kits. The highest-quality NOS components are utilized for the best-looking, best performing system on the market. Just like other NOS kits, the PowerFoggerTM has been thoroughly dyno-tested on numerous vehicles to ensure that customers get safe, dependable results on any vehicle they decide to "squeeze." Features Exclusive NOS "Soft-Plume" Fogger nozzle producing the finest and safest fuel/nitrous mixture. NOS 10-pound blue bottle w/ brackets & high flow bottle valve. Industry-leading instruction manual. 30-50-75 Horsepower jetting for 4 & 6 cylinder kits. 75-100-125 Horsepower jetting for 8 cylinder kit. Micro switch, safety relays and all other components for a simple installation. System Requirements The EFI kits are designed for use with stock engines. A stock fuel pump should be adequate, however many pumps decline in performance over the years, and it is important to have a fuel pump that meets new specs. Use only premium grade pump gasoline (92+ octane) or unleaded racing fuel. In many instances, a high output ignition and freer-flowing exhaust system may benefit performance. Do not use aftermarket chips or other devices that advance ignition timing, as detonation may occur.

-------- Select Your Vehicle Or Optional Accessories -------- 8 Cylinder EFI (35-75) Wet w/Drive-by Wire System 8 Cylinder EFI Wet (75-125 hp) Nitrous System Ford 05-07 Mustang EFI (75-125 hp) Wet System Ford 03-04 Mustang Cobra EFI(50-150hp) Wet System Ford 88-04 Mustang EFI (75-150hp) Stage I Dry System Ford 88-04 Mustang EFI (75-150hp) Stage II Dry System GM LS1 EFI Wet (100-150 hp) Nitrous Plate System GM LS2 EFI Wet (100-150 hp) Nitrous Plate System Optional Accessories Listed Below On This Page Recommended Optional Accessories Purge Valve Kit, Ntimidator Illuminated, Blue LED, -4 AN, Kit Nitrous Purge Valve Kit, -4 AN, Kit Bottle Heater, Bottle, 12 V Thermostatically Controlled Bottle Blanket w/Blue NOS Logo, Fits 7 in. Diameter, 10 lb. Bottle Fuel Injection Drive-By-Wire Wide Open Throttle Window Switch Micro Throttle Switche 25 Amps, Kit Arming Switch Rocker Style Black Plastic Nitrous Oxide Intercooler Spray Bar Kit (w/5lb bottle) Bottle Wrench w/Cushion Handle, For Use W/NOS Bottle Nuts

NOS™ E.F.I. Nitrous Kits

Click-On Price to Order

N.O.S.™ Nitrous Purge Valve Kits

The primary purpose of a purge valve is to release trapped air or gaseous Nitrous from feed line(s). Helps to ensure consistent performances. And it looks cool, too. You've probably seen the Import or Pro Mod guys do it. Includes all required components.

• Release Trapped Air In Feed Lines
• Ensures Consistent Performance
• Includes All Required Components

Click-On Price to Order

N.O.S.™ Nitrous Oxide Bottle Heater

NOS systems are calibrated for optimum performance with a bottle pressure of 900– 950 psi. The pressure will change with temperature. This NOS Heater kits is thermostatically controlled to keep the bottle at correct 900– 950 psi.

• Calibrated For Optimal Performance
• Bottle Pressure Of 900-950 PSI
• Thermostatically Controlled
• Provides Correct Pressure

Click-On Price to Order

N.O.S.™ Nitrous Bottle Blanket

Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The NOS bottle blanket is made of a rugged, easily cleaned Nylon outer shell with insulation. It's also an excellent “dress up” accessory —and perfect for “covering” battle–scarred bottles. .

• Helps Maintain Pressure
• Keeps Heat In Bottle, Keeps Heat Out
• Nylon Outer Shell/With Insulation
• Dress Up Accessory/Easily Cleaned

Click-On Price to Order

N.O.S.™ Drive-By-Wire
Wide Open Throttle Window Switch

Tired of trying to figure out how to install a WOT (wide open throttle) switch by your gas pedal on your Drive–By–Wire vehicle? (What is Drive–By–Wire you ask? Drive–By–Wire vehicles control the throttle of your engine electronically rather than via a conventional cable connected between your gas pedal and the engine.) Well, NOS has the answer.

NOS is proud to introduce their new WOT/Window switch for DBW vehicles. Designed to work on sequential firing, multi–point fuel Injection systems, the NOS WOT/Window switch allows for trouble–free, easy, Nitrous activation. The NOS WOT/Window switch features adjustable low and high RPM set points and TPS activation, all in a compact easy to install design.

Click-On Price to Order

N.O.S.™ Microswitch & Bracket

Microswitch & Bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. NOS brand Micro Throttle Switches can be used as either the primary method of activating a Nitrous system, or as a safety device (in conjunction with another switch to prevent Nitrous from coming on unless the vehicle is at WOT (wide open throttle).

• To Activate Solenoids, Fuel Pumps, etc.
• Heavy-Duty Specialty Switch with bracket
• Controls System Operation

Click-On Price to Order

N.O.S.™ Arming Switch
Rocker Style Black Plastic

Toggle Switch (Lighted) – To enable performance enthusiasts to activate solenoids, fuel pumps and most anything else.

• Activate Solenoids/Fuel Pumps
• Heavy-Duty Specialty Switch
• Controls System Operation

Click-On Price to Order

N.O.S.™ Nitrous Bottle Nut Wrench

This special wrench was designed for quick removal of bottle nut adapters on NOS Hi-Flo and Super Hi-Flo valves without damage. Short handle design prevents over-torquing.

• Aircraft Type Stainless Steel
• Eases in Installation/Removal

Click-On Price to Order

N.O.S.™ Inter-Cooler Spray Bar Kit

This new N.O.S.™ snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20º and allows you to safely run more boost for more power. Cut to length design for use with all intercoolers unlike competitive halo units.

Kit includes 5LB NOS bottle & all necessary hardware for easy installation

• New Cobra Snake Design
• Adjustable To Fit All Intercoolers
• Decreased Intake Air Temperatures
• 20 inches wide & 6 inches tall

Click-On Price to Order