| DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR YOUR 03-04 MACH I MUSTANG
|
 STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 4.6L 4V Mod Motor.
We have invested many hours evaluating and refining each of the 4.6L products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
|
If We Don't Have It - You Don't Want It !
MOTOBLUE™ SFI Approved H.O. Series Power Pulley Kit
What's an underdrive pulley?
An underdrive pulley is a replacement pulley that bolts up the same as stock, but has a different size (ratio) and material specifications intended to free up lost horsepower. By increasing the diameter of each accessory pulley and decreasing the size of the crank pulley, the speed at which the accessories are turning relative to engine RPM decreases.
 Under drive pulleys do not add power to the engine, they free up the power that is normally wasted on overdriven accessories. The theory is that a larger pulley will drive the accessories slower thus reducing their parasitic horsepower loss.
No more power total, but more power sent to the wheels. As an additional benefit, the reduction in wear (less usage) on the accessories due to the lower duty cycles can extend the life of these parts.
For example, the alternator, power steering, water pump and air compressor rob horsepower from
the engine. By replacing factory-sized crank balancer/pulley and water pump drive pulley with a resized pulleys,
the accessories are slowed, resulting in more horsepower available to the drive wheels.
MOTOBLUE™ H.O. Series pulleys will increase horsepower up to 12 RWHP, and increase mileage by 1 to 2 MPG. MOTOBLUE H.O Pulleys
are manufactured from billet steel, exceeding factory quality and are the only Pulley system available on the market
today that are SFI approved for all racing applications.
Installation: The kit includes all required components and hardware for a complete installation.
Tech Notes: Use of Harmonic Balancer Puller tool required for factory Harmonic Balancer removal.
|
| Part # |
Year |
Engine |
Part Description |
Price |
| MTB-462328L |
01½-04 |
4.6 2v
4.6 4v |
MOTOBLUE™ H.O. Series Power Pulley Kit- H.O. 25% SFI Approved Replacement Harmonic Balancer Pulley
- 22% Short Style Water Pump Pulley
- 8% Alternator Pulley
- Retains Stock belt
|
$ 199.99 |
| MTB-462328E |
96-01½ |
4.6 2v
4.6 4v |
MOTOBLUE™ H.O. Series Power Pulley Kit- H.O. 25% SFI Approved Replacement Harmonic Balancer Pulley
- 26% Long Style Water Pump Pulley
- 8% Alternator Pulley
- Retains Stock belt
|
$ 199.99 |
| MTB-462328 |
96-08 |
4.6L
5.4L |
MOTOBLUE™ 25% Underdrive Crank Pulley- 25% Underdrive SFI Approved
- Replacement Harmonic Balancer Pulley (only)
|
$ 149.99 |
| MTB460155 |
03-04 |
4.6 2v
4.6 4v |
MOTOBLUE™ 22% underdrive Pulley- CNC Billet Water Pump Pulley
- Adds up to 4.2 HP
|
$ 49.99 |
Click-On Price to Order
High Flow Meizer Electric Water Pump Upgrade Kit
Increase your horsepower up to 12 RWHP, and increase mileage by 1 to 2 MPG
 RPM Outlet is proud to announce the
introduction of an exciting new product, the Meziere extreme duty electric water pump! Yes, we said an electric
water pump. This design has been in use since 1996, and has proven to be as reliable as the OEM water pump.
The Meziere
extreme duty electric water pump replaces the factory high drag, horsepower robbing, factory
water pump. The Meziere extreme duty electric water pump increases your horsepower up to 15 RWHP, and increase mileage by 1 to 2 MPG! This pump was designed
with the daily street driven vehicle in mind, and it can also be used on fully equipped racecar.
Installation of this pump is identical to the factory pump installation, and can be easily
completed in less than 1 hour. This is a direct replacement for the factory belt driven
water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention
of the stock belt. It also provides an unbelievably constant water temperature under any condition. |
 |
- Direct Replacment *
- Solid 12 Rear Wheel HP
- Flows 55 Gallons per Minute
- Designed for Daily Street Use
- Flows 55 Gallons per Minute
- Free-Wheeling Billet Idler
- Retention of the stock belt
- Stock Belt Routing
- Easy 1 Hour Installation
- Detailed Instructions Included
|
| Part # |
Engine |
Application |
Price |
| MEZ-WP346S |
4.6L
5.4L
6.8L |
Meziere High Flow Electric Street Water Pump (satin finish)- CNC-machined from 6061-T6 billet aluminum
- Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP *
|
$ 329.95 |
| MEZ-WP346C |
4.6L
5.4L
6.8L |
MeziereHigh Flow Electric Street Water Pump (chrome Finish)- CNC-machined from 6061-T6 billet aluminum
- Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP *
|
$ 409.95 |
| MEZ-WIK346 |
4.6L
5.4L
6.8L |
Electric Street Water Pump (Relay Kit)* |
$ 39.95 |
| MTB-462328 |
4.6L
5.4L
6.8L |
MOTOBLUE™ 25% Underdrive Crank Pulley- 25% Underdrive SFI Approved
- Replacement Harmonic Balancer Pulley (only)
|
$ 149.99 |
| ROY-01600 | All |
Royal Purple Ice Super Coolant Additive |
$ 10.95 |
| ZEX-82002 | All |
|
$ 26.99 |
Click-On Price to Order *Designed for use with an electric fan kit
MOTOBLUE™ CNC Billet Water Pump Pulley
 |
Free Up Extra Horsepower!
Replace your factory high drag steel water pump pulley with a MOTOBLUE™ 22% under drive billet aluminum water
pump pulley. The MOTOBLUE™ Water pump pulley is designed to free up extra horsepower by reducing the amount of
water drag at high RPM’s, adds 4.2 HP and 6.1 Ft-Lb of torque. Installation time is 10 minuets, and is available for same day shipping.
|
| Part # |
Year |
Engine |
Application |
Price |
| MTB460155 |
01-04 |
4.6 2v
4.6 4v |
MOTOBLUE™ 22% underdrive Pulley- CNC Billet Water Pump Pulley
- Adds up to 4.2 HP
|
$ 49.99 |
*Designed for use with an electric fan kit
*** Works on short water pump design only
Click-On Price to Order
Hypertech 160° / 180° Low-Temperature Thermostat
|
- Increases Mass Flow Rate of Intake Air
- Allows Engine to Cool Down to Lower Temperature than Factory Thermostats
- Reduces Engine's Tendency to Detonate
- Reduces Temperature of Both the Incoming Air/Fuel Mixture and Combustion Chamber Surface
|
|
A Hypertech PowerStat low-temp thermostat improves performance
in two ways: first by increasing the mass flow rate of intake
air, and second by reducing the engine's tendency to detonate.
From the laws of physics, cooler air is denser than
warmer air. Since horsepower increases as the amount of air
and fuel burned increases, cooler air (with more air molecules
per cubic inch) makes more power. The
PowerStat allows the engine to cool down to a lower temperature
than the factory thermostat to make more power. At the drag races, water can be sprayed
on the radiator between races to drop the temperature and improve performance. The PowerStat ensures that you leave the line at the same temperature on each run to give consistent maximum performance for bracket racing.
|
|
Detonation, usually producing audible pinging or even knocking
sounds, refers to the spontaneous explosion of the unburned air/fuel
mixture in the combustion chamber. Detonation abruptly and violently
ends the normal combustion process, reduces power, and can severely
damage the engine. A PowerStat reduces the temperature of both
the incoming air/fuel mixture and the surfaces of the combustion
chamber, greatly reducing the tendency to detonate. This allows
the engine to safely develop more horsepower.
PowerStats should always be used in an engine controlled by a
computer to insure consistent performance. |
For All Cars - Trucks With Manual Fans
For better heater output in cold weather driving, a 180 ° PowerStat
can be substituted for any application that requires a 160° PowerStat.
|
| Ford 160° PowerStats |
| Part #
| Year
| Engine
| Model
| Price
|
| HYP1011
| 94-07
| 4.6/5.4
| All Car - Truck |
$ 16.95 |
|
| Ford 180° PowerStats |
| Part #
| Year
| Engine
| Model
| Price
|
| HYP1025
| 94-07
| 4.6L 3V
| All Car - Truck |
$ 16.95 |
|
Click-On Price to Order
| |
Synthetic Motor Oil / Gear Fluids 
Coolant Power Steering / Fill Tanks 
Stainless Steel Hood Pin Kits 
TRUEFLOW Inlet/85mm Cold-Air
K&N Gen. II FIPK® (14+ hp)
Cleaning / Filter Kits 
Filters
POLISHED Twin 62mm Throttle Body
Twin 62mm-65mm Throttle Body Kits
80/85mm MAF/Adaptor Kit/Hoses
Battery Box and Relocation Kit 
Eradi-Speed +2 Upgrade
Cross-Drilled Slotted Rotors
Stainless Steel Brake Line Kits 
Performance Brake Pad Kits 
PREDATOR Tuner (+27hp)
Strategy Flash Tuner
Special Forces Tuning Software 
160º/180º LOW TEMP T/Stats
Aluminum Driveshaft Kits
Gear Sets, 3.73/4.10 Ratio
LAKEWOOD Driveshaft Safety Loop Kit
Rear End Girdle and Stud kit 
DYNO TUNED POWER OPTIONS™
Stage I/II/III Camshafts/Spring
Stage I/II/III Camshafts/Spring
ENGINE Motor Mount Kit
CERAMIC Mid-length
1"3/4 Long-Tube Header Kit 
STAINLESS X-Pipe w/wo Cats
X-Pipe with and without cats
American Thunder Exhaust Kits
Performance Exhaust Kits
D-Pic Performance Info Meters
Wideband air/fuel with data-logger
Full A-Pillar, Pods, Clusters 
DIGITAL DIS-4 Ignition Kit
DIGITAL HyFire VIII CD Ignition
Copper / Iridium Spark Plugs 
™ Nitrous Oxide Systems (35-175 hp)
NITROUS OXIDE Kit (75-175 hp)
Boost Coolers 
Tubular K-Member / Coil-Over Kits
Caster-Camber / Wheel Spacer Kits 
MATRIX Sub-frame Kit
Drag Radials / Drag Slicks
PRO RIPPER -and- HAMMER Shifters
Mustang Performance Shifters 
RST/RXT Dual Clutch/Flywheel Kits
DFX Clutches / Flywheel Kits
Street Dual Clutch/Flywheel Kits