The days of poor performance aftermarket cams are gone. RPM Outlet is proud to announce COMP CAMS EXTREME Energy Camshafts for FORD 4.6L/5.4 DOHC MODULAR (4 VALVE) Engines. It is the choice for the best in mod motor camshafts. COMP CAMS EXTREME Energy Camshaft profiles offer faster valve openings and more area under the curve, which helps promote a broad torque and horsepower RPM band. COMP CAMS modular engine cams offer a unique valve train design, which has allowed design engineers to push the limits on valve train acceleration rates, while still maintaining everyday driving reliability.

When it comes to valve springs technology, there is no better choice. COMP CAMS design engineers took the engines rpm capability, lightweight valve train, durability and other unique features, and designed the ultimate modular valve springs.

COMP CAMS BEEHIVE™ VALVE SPRINGS revolutionary design features, such as the harmonic resistant shape, Super Clean™ ovate wire material and reduced spring mass, allow the Beehive™ springs to better control the valve with a minimum of spring pressure. The bottom line is increased valve train stability, yielding more usable rpm and more horsepower than you ever thought was possible.

EXTREME Energy Stage I Camshafts
-- STREET Performance for normally aspirated engines.
• Requires computer programming
• Noticeable Idle. (set of 4 camshafts)

EXTREME Energy Stage II Camshafts
-- HOT Street use profile.
• Requires larger throttle body, mass air, and exhaust
• Requires lower gears and custom programming
• Automatics use a 2200+ stall
• New valve springs required
• Rough Idle. (set of 4 camshafts)

EXTREME Energy Stage III Camshafts
-- RACE Limited street use profile.
• Requires larger t-body, mass air, injectors and exhaust
• Requires lower gears and custom programming
• Automatics use a 3000+ stall
• New valve springs required
• Very Rough Idle. (set of 4 camshafts)

EXTREME Energy Stage I Camshafts SUPERCHARGED.
-- STREET Performance for Supercharged/Nitrous use.
• Works well in supercharged or nitrous engines
• Requires computer programming
• Noticeable Idle. (set of 4 camshafts)

EXTREME Energy Stage II Camshafts SUPERCHARGED.
-- STREET/STRIP Supercharged/Nitrous applications.
• Requires custom programming and lower gears
• Automatics will require a 2000+ stall
• Mild Rough Idle. (set of 4 camshafts)

EXTREME Energy Stage III Camshafts SUPERCHARGED.
-- MAX Street/Strip Supercharged/Nitrous applications.
• Requires larger t-body, mass air, injectors and exhaust
• Requires lower gears and custom programming
• Automatics use a 2500+ stall
• New valve springs required
• Rough Idle. (set of4 camshafts)

COMP Cams® Ford 4.6/5.4L SOHC And DOHC Adjustable Cam Gear Kit
• 24-degree window of adjustability –12 degrees of advance or retard
• Equipped with the proper timing sensor for a trouble free install
• Installs exactly the same as the original factory gears

When it comes to valve springs and titanium retainers, there is no better choice. COMP CAMS design engineers took the engines rpm capability, lightweight valve train, durability and other unique features, and designed the ultimate modular valve springs.

COMP CAMS BEEHIVE™ VALVE SPRINGS springs are made from a high tensile, super clean, chrome silicone material, the retainers are titanium, . In fact, the single beehive shaped spring uses the same manufacturing process for either their low-pressure street spring or their limited street and race spring. The springs are designed to work with cams up to 0.525" lift, and fit stock pockets without any machine work. These springs and retainers are a perfect compliment for the EXTREME Energy Camshafts.

COMP CAMS BEEHIVE™ VALVE SPRINGS
• 32 High Pressure Ovate Valve Springs
• Spring pressure: Seat: 1.420'@ 76lbs
• nose: 0.910'@244lbs
• coil bind: 0.850'
• Works with stock retainers
• No machine work required

COMP CAMS TITANIUM RETAINERS
• 32 titanium retainers
• Designed to work with stock or BEEHIVE™ Valve Springs
• No machine work required

COMP CAMS STEEL RETAINERS
• 32 steel retainers
• Designed to work with stock or BEEHIVE™ Valve Springs
• No machine work required

COMP Cams® Ford 4.6/5.4L SOHC And DOHC Adjustable Cam Gear Kit
• 24-degree window of adjustability –12 degrees of advance or retard
• Equipped with the proper timing sensor for a trouble free install
• Installs exactly the same as the original factory gears