CANTON ALUMINUM COOLANT EXPANSION / FILL TANK / POWER STEERING TANK
(1996-04 MUSTANG GT/2003-04 COBRA/MACH-1)

We are proud to announce the introduction of the newest additions of the Canton Racing Products S Series Aluminum model spicific tanks. Back by popular demand are the Canton Racing Products new and improved S Series Aluminum Coolant Expansion tank, Supercharger Aluminum Coolant tank, and the Truck specific Power steering tank.

CANTONS NEW S Series aluminum coolant expansion/fill tank is a direct bolt-in replacement. Exclusive Billet factory stock vented cap, bleeds pressure just like the factory plastic tank.

CANTONS NEW S Series aluminum coolant expansion/fill tank holds just under 1/2 additional gallon of fluid more than the stock tank.

Part# CAN80-232S $ 138.00

This 1996-04 Mustang specific light weight power steering tank offers increased strength and an improved look over the factory tank. It is baffled for proper fluid control and comes with the necessary brackets for installation in the factory position.


• 1996-04 MUSTANG GT
• 2003-04 MUSTANG COBRA
• 2003-04 MUSTANG MACH-1
  
  Part# CAN77-232 $ 88.00
  
  

This high quality canton billet radiator cap cover is carved from solid billet aluminum. This simple but stylish look will brighten up your engine bay and enhance the look of your mustang when you show it off. Attaches with a stainless set screw so it's functional.


• 1996-09 MUSTANG GT
• 2007-09 SHELBY GT500
  
  Part# CAN81-232 $ 30.00
  
  

Authentic Hood Pins. These Hood Pins are real thing; they do require drilling into your hood. Not just a simple second rate type that adheres to your hood using plstic tape or made from cheap Zinc Die Cast Chrome Plated Plastic.

This kit is competition-proven for quick opening of hood and has show-type eye appeal. Stainless steel scuff plates and long lanyard cables make a super kit that installs easily

Best yet they work on every Mustang; early, late, and any model.

• Mustang; early, late, and any model
• Long lanyard stainless cables
• Stainless steel scuff plates
• CNC laser cut tooling
  
  
  Origional Hairpin-Style Clip 4 in. Long #MRG-1616 $ 19.99
  
  Competition Torsion Clip Style 4 in. Long #MRG-1607 $ 19.99
  
  

      Click-On Price to Order

MOTOBLUE™ 22% billet aluminum pulley


• 22% underdrive water pump pulley (billet)
• Adds 4.2 HP and 6.1 Ft-Lb of torque.

The Meziere extreme duty electric water pump replaces the factory high drag, horsepower robbing, factory water pump. The Meziere extreme duty electric water pump increases your horsepower up to 15 RWHP, and increase mileage by 1 to 2 MPG! This pump was designed with the daily street driven vehicle in mind, and it can also be used on fully equipped racecar. Installation of this pump is identical to the factory pump installation, and can be easily completed in less than 1 hour.

This is a direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt. It also provides an unbelievably constant water temperature under any condition.

• Direct Replacment *
• Solid 12 Rear Wheel HP
• Flows 55 Gallons per Minute
• Designed for Daily Street Use
• Free-Wheeling Billet Idler
• Retention of the stock belt
• Stock Belt Routing
• Easy 1 Hour Installation
• Detailed Instructions Included

Meziere High Flow Electric Street Water Pump (satin finish)


• CNC-machined from 6061-T6 billet aluminum.
• Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP.


Meziere High Flow Electric Street Water Pump is direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt.

Meziere High Flow Electric Street Water Pump (chrome finish)


• CNC-machined from 6061-T6 billet aluminum.
• Flows 55 GPM, Dyno tests prove a gain of over 12 RWHP.


Meziere High Flow Electric Street Water Pump is direct replacement for the factory belt driven water pump. It comes equipped with a freewheeling billet idler pulley allowing the retention of the stock belt.

A Hypertech PowerStat low-temp thermostat improves performance in two ways: first by increasing the mass flow rate of intake air, and second by reducing the engine's tendency to detonate.

From the laws of physics, cooler air is denser than warmer air. Since horsepower increases as the amount of air and fuel burned increases, cooler air (with more air molecules per cubic inch) makes more power. The PowerStat allows the engine to cool down to a lower temperature than the factory thermostat to make more power. At the drag races, water can be sprayed on the radiator between races to drop the temperature and improve performance. The PowerStat ensures that you leave the line at the same temperature on each run to give consistent maximum performance for bracket racing.

A lower temp T-stat reduces the temperature of both the incoming air/fuel mixture and the surfaces of the combustion chamber, greatly reducing the tendency to detonate. Detonation is an audible pinging / knocking sounds, refers to the spontaneous explosion of the unburned air/fuel mixture in the combustion chamber. Detonation reduces power, and can severely damage an engine. A lower temp T-stat allows the engine to safely develop more horsepower.

Purple Ice® is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines. It is formulated to reduce the surface tension of the coolant, which improves heat transfer through the cooling system while providing additional protection against rust, corrosion and erosion.

Purple Ice® prevents the formation of scale deposits in the radiator for optimum coolant flow and lubricates the seals of the water pump. It is ideal for use in straight water racing applications or in antifreeze / water mixtures.

Purple Ice® is compatible with traditional ethylene glycol antifreeze (green) and GM Dex-Cool® antifreeze coolants. Purple Ice should not be used in new radiators until anti-freeze has been cycled through the