| DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 96-01 FORD MUSTANG COBRA
|
|
|  STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 96-01 Mustang Cobra.
We have invested many hours evaluating and refining each of the 4.6L Cobra products on our MD chassis DYNO, to ensure that we could develop as much power as possible, as safely as possible.
The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
|
RPM Outlet is proud to announce the introduction of Our Dyno Tuned Options™
For the 96-01 Mustang Cobra
BBK PREMIUM SERIES 1 5/8" Full-Length HEADERS
|
Built from computer mandrel-bent 1 5/8" tubing, 3/8" thick laser-cut flanges, and standard polished ceramic finish, these systems deliver unmatched quality at very affordable prices(matching short H-Pipes are also available to make installation a direct bolt-in procedure).
|
 |
BBK Headers Feature:
- Guaranteed Fit & Finish
- Adds Up to 30 Horsepower
- Standard Polished Ceramic Finish
- 3/8" Thick Laser-Cut Flanges
- Single Port Flanges prevents gasket falure
- Compatible with all factory emissions equipment
- Complete with nuts, bolts, installation hardware
- Includes detailed instructions and all necessary installation hardware—no additional fabrication required!
|
| Part # |
Year |
Application |
Description |
Price |
| BBK15330 |
99-04 |
4.6L Cobra Mustang/Mach 1 |
1 5/8" Full-Length Ceramic Headers |
$ 489.95 |
| BBK15410 |
96-04 |
4.6L Mustang GT |
1 5/8" Full-Length Ceramic Headers |
$ 489.95 |
| M-9448-A462 |
- High-temperature steel core/graphite faced
exhaust header gasket
- Designed for 4.6L SOHC Heads, packaged 2 per set
|
$ 29.95 |
| M-9448-A464 |
- High-temperature steel core/graphite faced
exhaust header gasket
- Designed for 4.6L DOHC Heads, packaged 2 per set
|
$ 29.95 |
Click-On Price to Order
Click-On Price to Order
| INSTALLER NOTE:
MOTOBLUE™ highly recommends hiring a professional installer, one that is familiar with the
installation of off-road performance products. MOTOBLUE™ products are designed to increase the performance
of your vehicle, and as such are designed differently than your stock system. Extra care must be taken to insure
that any interaction between this system and other systems that you have on the vehicle have been taken into account
when installing performance products. This includes but are not limited to, fit of components, rubbing leakage, possible
contact with moving parts and or contact with heat sources. |
| DISCLAIMER:
Some products sold by on this website are not legal for sale or use on any pollution controlled motor vehicles.
Legal in California only for racing vehicles which may never be used on U.S. highways. Not legal for sale or use in the state of California, nor in states which
have adopted California emission standards. |
|
Synthetic Motor Oil / Gear Fluids 
Coolant Power Steering / Fill Tanks 
Stainless Steel Hood Pin Kits 
COBRA Cold-Air Intake (12+ hp)
TRUEFLOW Inlet Pipe (5+ hp)
MAF Housings/Accessories
ACCUFAB 1000cfm Throttle Body
Battery Box and Relocation Kit 
CLAW Brake Upgrade
Cross-Drilled Slotted Rotors
Stainless Steel Brake Line Kits 
Performance Brake Pad Kits 
160º/180º LOW TEMP T/Stats
PREDATOR Tuner (27+hp) 
LIVEWIRE/X3 Flash Tuners
Special Forces Tuning Software 
CORTEX Flash Tuner 
Aluminum Driveshaft Kits
Gear Sets, 3.73/4.10 Ratio
LAKEWOOD Driveshaft Safety Loop Kit
Rear End Girdle and Stud kit 
DYNO TUNED POWER OPTIONS™
Stage I/II/III Camshafts/Spring
Stage I/II/III Camshafts/Spring
CERAMIC Mid-length
1"3/4 CERAMIC Long-Tube Kit 
STAINLESS X-Pipe w/wo Cats
True X-Pipe with/without cats
American Thunder Exhaust Kits
Performance Exhaust Kits
D-Pic Performance Info Meters
Wideband air/fuel with data-logger
Full A-Pillar, Pods, Clusters 
DIGITAL DIS-4 Ignition Kit
DIGITAL HyFire VIII CD Ignition
Copper / Iridium Spark Plugs 
™ Nitrous Oxide Systems (35-175 hp)
NITROUS OXIDE Kit (75-175 hp)
Boost Coolers 
Tubular K-Member / Coil-Over Kits
PRO-KIT / SPORTLINE Spring Kits
Sub-frame Connectors
Drag Radials / Drag Slicks
Mustang Performance Shifters 
PRO RIPPER -and- HAMMER Shifters
Dual- Friction Clutch Kits
Street-Strip Clutch/Flywheel Kits