Fore Innovations Fuel Pump Module Dual / Compact For 2003-2013 Corvette

Fits Vehicle 

• 2003-2004 C5 Corvette (all models)
• 2005-2013 C6 Corvette (all models)
• 2007-2014 C6 Corvette ZR1

SKU: 38-801

Fore Innovation’s dual fuel pump solution for the 2003-2013 Corvette that drops in with ease. Coupled with two fuel pumps and their FC3 controller, this module will provide more fuel than any other dual pump in-tank solution plus low noise and fuel heat. (with the exception of their wide format version, which requires disassembly for installation)

The module is constructed from CNC machined aluminum, anodized black. All bare hardware is stainless steel and brass, and all O-rings are Viton. The wires pass through the flange using their proven hermetic seal. The pump outlets are sealed using their Viton sealed cartridges using internal stainless snap rings. (no fuel hose or clamps) Inside the fuel tank, their module interfaces with the factory venturi driven crossover function.

On the passenger side, they provide a CNC machined bypass plug so the venturi jet continues to function at lower fuel pressures. Their FC3 will operate one pump full time to keep fuel heat and noise levels down, and the remaining pump will activate under a trigger signal from your boost controller, aftermarket engine management system, or a pressure switch. Alternatively, you can run both pumps full time. Ideally, they suggest running a more reliable, cooler running low performance pump full time, then running high performance pumps in the secondary positions.

• Supports 1000 rear wheel horsepower (call for more detail on your application)
• Requires aftermarket fuel lines, upgraded filtration, and external fuel pressure regulator (see their complete systems)
• Retains OE level sender and crossover function (passenger side regulator bypass plug included)
• E85 and race fuel compatible (see Fuel Pump Selection for fuel compatibility)
• O-ring pump seals eliminate in-tank fuel hose to completely eliminate failures
• Hermetic wire seal completely eliminates the possibility of fuel smells and leaks
• Two pairs of 12 gauge power wires ensure maximum pump performance
• 1000 rwhp capable
• drop-in installation with 39mm pumps (one 39/50mm pump permitted)