Meziere Enterprises High Flow Electric Water Pump For Mopar Small Block Late Model Hemi ? Polished

Fits Vehicle: 2005-2022 Dodge

Image is a representation of this item. Actual item may vary.

This water pump model features:

• Fits Mopar late model Hemi 5.7 and 6.1 engine
• Suitable for street or drag strip use – 3000+ hour life expectancy
• Show quality finish
• Provides 55 gallons per minute free flow rating
• All stainless steel hardware included
• Light weight. Complete late model Hemi unit weighs only 10.7 pounds!
• Stainless steel large diameter main shaft with high performance ceramic seal
• WN style inlet adapters are available for #12AN, #16AN, #20AN, 1¼”, 1½” or 1¾” slip hose
• • Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting. The fitting needs to be ordered according to the size of the lower radiator hose.
  • Finishing The System: A back plate may be necessary if this pump is being mounted to a stock timing cover. See Accessory WP315
  • Amperage draw: Under normal use the pump will draw 11-12 amps.
  • Overall Height Dimension: The standard pump is 6.75″ long from the mounting surface to the tip of the pump.
  • Pump Weight: This application weighs 10.7 lbs.
  • 16 volt systems: The 12 volt pump will work for limited use applications. The pump should not be powered while charging your 16 volt system.

  Additional Note: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, Turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard. These may be added at the factory for an additional cost. Please call for details.
  Additional Note: This pump is not a direct bolt-on for factory vehicles. It is for engines in aftermarket vehicles where the belt routing is planned to avoid contact with the pump. For more information call our tech line.

Brand

Meziere Enterprises