Fabspeed Chevrolet Corvette C8 Z06 Titanium Valved Cat-Back Exhaust System (2023+) – Carbon Fiber Tips

The Fabspeed Titanium Valved Cat-Back Exhaust System is the ULTIMATE exhaust solution for the C8 Z06. It provides the same high pitched scream 6700rpm rip  that our Supersport X-Pipe exhaust has while also allowing the driver to quiet the exhaust down using the factory exhaust loudness settings. It’s totally plug-and-play with the factory exhaust valve electric actuator modules. Retaining ALL drive modes, and Z-mode abilities. NO FAULT CODES with Fabspeed Valved BECAUSE ONLY Fabspeed uses the WOLRDS VERY BEST EXHAUST VALVES from Helical limited Great Britain versus cheap Chinese garbage valves- like local competitors and all competitors. 

Our design process started with 3D scanning the entire OEM exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we decided to use our signature cast Titanium X-Pipe to tie the two cylinder banks together for exhaust scavenging and to defeat resonance. The valves are mounted to CNC’d plates that resist heat and keep the electronics working under extreme conditions. The piping is mandrel bent from Titanium, and we use ultra high temp heat wrapping to keep temps in the engine bay down.

FEATURES:

• Fits all Chevrolet Corvette C8 Z06 2023+ Models (Except EU Spec Models) 
• Weight savings of -35 lbs / -17 kg vs the factory exhaust
• Your choice of Carbon Fiber tips with new carbon fiber surround trim, TITANIUM QUAD tips blued titanium and or retain your factory quad Z06 tips
• Plug-and-play Helical UK valves that completely retain the factory exhaust valve functionality- WITH 100% GUaRANTEED RELIABILITY . no fault codes like cheap mongrel exhaust valves.
• Incorporates our signature cast Titanium X-pipe for superior flow and exhaust scavenging
• Larger diameter tubing allows the Z06 engine to really breathe
• Constructed from high-quality 14-16ga CNC mandrel-bent Titanium for optimum flow and maximum durability
• NO CHEAP CHINESE PIE CUT  multiple pieces of titanium all welded together like a lobster tail. PIE CUT multiple pieces of titanium or stainless steel is INDICATIVE OF CHEAP SWEAT SHOW CHINESE LABOR and a lousy ALIBABA 100% guaranteed to fail system. Pie Cut AINT Craftsmanship. THINK- mandrel bent 1 piece tubing as much as possible is OBVIOUSLY stronger and flows more and reduced HAZ- look it up in welding heat affected zones. 
• Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
• No Check Engine Light guaranteed
• This cat-back exhaust is 100% emissions legal worldwide
• Simple DIY bolt-on installation, no cutting or welding required
• All hardware included
• 100% built in house and DYNO developed at Fabspeed Motorsport USA
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

SOUND:

This incredibly versatile exhaust is able to go from tame cruiser, to thoroughbred race car with the press of a button. With the car set to the loud exhaust mode (valves open), you’ll be treated to a much more authoritative rumble at idle, and our signature Ti X-pipe bringing out the a high pitched wail that, dare we say, exceeds that of the Ferrari 458. With the Z06 set to quiet mode (valves closed), it’s totally drone free and you can easily have a conversation in the cabin just like the OEM exhaust.

Fitment Details

Brand

Fabspeed Motorsport