$471.92
8 in stock
The strength limitations of the Bronco’s factory steering tie rods has been well documented, especially by Bronco owners who venture into the big rocks with big tires. These ICON XD Forged Tie Rods remedy this with better materials and beefier dimensions than the stock units. The inner tie rod and ball stud is CNC machined from 4140 chromoly. The adjustment threads, where we’ve seen most of the failures happen on stock tie rods, are18mm on the XD Forged Tie Rods versus 14mm on stock Bronco tie rods. The outer tie rod is forged steel and has the same bend as the stock tie rods for fitting all of the Bronco’s factory wheel diameters and offsets, along with just about any aftermarket wheel. The tie rod end is a beefier, metal on metal joint that is greaseable for extended service life and has the same range of operating angle as the stock tie rod ends. For the most hardcore of off-roaders, the ICON XD Forged Tie Rod kit is recommended as part of a comprehensive steering system upgrade strategy.
ICON XD Forged Tie Rods offer significant increase in strength with better materials and beefier dimensions than the stock tie rods while also capable of same range of motion and offer same tire fitment as OE units.
APPLICATION NOTE #261: Compatible with OE HOSS 1.0 & HOSS 2.0 steering racks. Also compatible with HOSS 3.0 steering racks but the dust boot must be stretched to fit over the rack housing.
- Includes inner tie rod boots that protect the steering rack from dirt and debris
- Metal on metal ball joint design with grease zerks
- Design to fit around factory wheel off set
- 30% larger diameter than OE tie rods
- Forged steel outer tie rod ends
- 4140 chromoly inner ball studs
- Limited lifetime warranty
Description
The strength limitations of the Bronco’s factory steering tie rods has been well documented, especially by Bronco owners who venture into the big rocks with big tires. These ICON XD Forged Tie Rods remedy this with better materials and beefier dimensions than the stock units. The inner tie rod and ball stud is CNC machined from 4140 chromoly. The adjustment threads, where we’ve seen most of the failures happen on stock tie rods, are18mm on the XD Forged Tie Rods versus 14mm on stock Bronco tie rods. The outer tie rod is forged steel and has the same bend as the stock tie rods for fitting all of the Bronco’s factory wheel diameters and offsets, along with just about any aftermarket wheel. The tie rod end is a beefier, metal on metal joint that is greaseable for extended service life and has the same range of operating angle as the stock tie rod ends. For the most hardcore of off-roaders, the ICON XD Forged Tie Rod kit is recommended as part of a comprehensive steering system upgrade strategy.
ICON XD Forged Tie Rods offer significant increase in strength with better materials and beefier dimensions than the stock tie rods while also capable of same range of motion and offer same tire fitment as OE units.
APPLICATION NOTE #261: Compatible with OE HOSS 1.0 & HOSS 2.0 steering racks. Also compatible with HOSS 3.0 steering racks but the dust boot must be stretched to fit over the rack housing.
- Includes inner tie rod boots that protect the steering rack from dirt and debris
- Metal on metal ball joint design with grease zerks
- Design to fit around factory wheel off set
- 30% larger diameter than OE tie rods
- Forged steel outer tie rod ends
- 4140 chromoly inner ball studs
- Limited lifetime warranty
Fits
2021 Ford Bronco Badlands
2021 Ford Bronco Base
2021 Ford Bronco Big Bend
2021 Ford Bronco Black Diamond
2021 Ford Bronco First Edition
2021 Ford Bronco Outer Banks
2021 Ford Bronco Wildtrak
2022 Ford Bronco Badlands
2022 Ford Bronco Base
2022 Ford Bronco Big Bend
2022 Ford Bronco Black Diamond
2022 Ford Bronco Everglades
2022 Ford Bronco Outer Banks
2022 Ford Bronco Wildtrak
2023 Ford Bronco Badlands
2023 Ford Bronco Base
2023 Ford Bronco Big Bend
2023 Ford Bronco Black Diamond
2023 Ford Bronco Everglades
2023 Ford Bronco Heritage Edition
2023 Ford Bronco Heritage Limited Edition
2023 Ford Bronco Outer Banks
2023 Ford Bronco Wildtrak
2024 Ford Bronco Badlands
2024 Ford Bronco Big Bend
2024 Ford Bronco Black Diamond
2024 Ford Bronco Everglades
2024 Ford Bronco Heritage Edition
2024 Ford Bronco Heritage Limited Edition
2024 Ford Bronco Outer Banks
2024 Ford Bronco Wildtrak
2025 Ford Bronco Badlands
2025 Ford Bronco Base
2025 Ford Bronco Big Bend
2025 Ford Bronco Heritage Edition
2025 Ford Bronco Outer Banks
2025 Ford Bronco Stroppe Edition
2026 Ford Bronco Badlands
2026 Ford Bronco Base
2026 Ford Bronco Big Bend
2026 Ford Bronco Heritage Edition
2026 Ford Bronco Outer Banks
2026 Ford Bronco Stroppe Edition
Additional information
| Weight | 10.9 lbs |
|---|---|
| Dimensions | 27.7 × 6.8 × 6.4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 00840103421209 |
| brand | ICON |
| part_number | 45212 |
Brand
Brand
ICON Vehicle Dynamics
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
2005-2010 Ford Mustang V6
BMR Suspension STB010 Strut Tower Brace for 2005-2010 Ford Mustang V6
2016-2018 Chevrolet Camaro SS
BMR Suspension STB020 Strut Tower Brace, Front, Stainless Steel for 2016-2024 V8 Camaro
2015-2017 Ford Mustang EcoBoost
BMR Suspension CB763 K-Member Chassis Brace for 2015-2019 Ford Mustang
2016-2018 Chevrolet Camaro SS
BMR Suspension STB019 Strut Tower Brace, Front, Twin Tube Design for 2016-2020 Chevrolet Camaro
2015-2017 Ford Mustang EcoBoost
BMR Suspension CB006 Front 4-Point Subframe Chassis Brace for 2015-2017 Ford Mustang
Reviews
There are no reviews yet.